Sailboat Steering & Wheels

Pedestal, wheels, quadrants, tiller arms, radials, service parts, with a sailboat in the background.

Jacob E. Marine offers top-of-the-line sailboat products that are built to last. From pedestals and steerers to steering hardware, like our quadrants and radial drive wheels.

Pedestals and Steerers, with a boat sailing in the background. Link to the pedestals and steerers page.

Carbon Fiber Wheel, teak rimmed destroyer wheel, character wheel, with a boat at anchor in the background. Link to Wheels Page.

Idler assembly, conduit parts, chain and wire, and water in the background. Link to Service Parts page.

Tiller arms for autopilots. Link to tiller arm page.

Radial Drive wheels. Link to Radial Drive Wheel page.

Chain & Wire Kit - 2S2B7 (77109)

MSRP:

Was:

Now: $352.00

Add to Cart
Bronze Hub for 36-inch to 42-inch Dia. Wheels

MSRP:

Was:

Now: $1,022.00

Add to Cart
26-inch Classic Teak Yacht Wheel with Teak Rim with 1-inch Straight Hub

MSRP:

Was:

Now: $4,946.00
408 Needle Bearing Shelf Steerer - 15 Tooth Sprocket 3/4-inch (#60) Chain - Tapered Shaft (With Brake)

MSRP:

Was:

Now: $1,511.00
3/4" Pull/Pull Conduit for 3/16" and 1/4" Wire Rope (includes two end fittings and grease)

MSRP:

Was:

Now: $143.00 - $542.00

Choose Options
Stainless Steel Shaft Collar 960-A-2715)

MSRP:

Was:

Now: $51.00

Add to Cart
Brake Kit for 418, 420, 476, 490 Steerers (316-STEERER)

MSRP:

Was:

Now: $110.00

Add to Cart
Pedestal Touch-Up Paint (A-2963)

MSRP:

Was:

Now: $37.00

Add to Cart
Nylon Shaft Washer (960-A-137)

MSRP:

Was:

Now: $4.00

Add to Cart
8in Bronze Sheave with Needle Bearings (ONLY)

MSRP:

Was:

Now: $722.00

Add to Cart
Flat Aluminum Sheave Assembly - 8" Aluminum Sheave

MSRP:

Was:

Now: $647.00

Add to Cart
Single Articu-Lock Sheave Assembly - 10" Aluminum Sheave

MSRP:

Was:

Now: $764.00

Add to Cart
Bronze Rudder Post Stuffing Box - 1.625" ID

MSRP:

Was:

Now: $273.00

Add to Cart
Right Angle Conduit Bracket

MSRP:

Was:

Now: $67.00

Add to Cart
Upright Conduit Idler - 6" Sheave

MSRP:

Was:

Now: $470.00

Add to Cart
Chain & Wire Kit - 2S2B9 (77111)

MSRP:

Was:

Now: $372.00

Add to Cart
Chrome Hub for 20-inch to 26-inch Dia. Wheels

MSRP:

Was:

Now: $1,009.00

Add to Cart
30-inch Classic Teak Yacht Wheel with Teak Rim with 1-inch Straight Hub

MSRP:

Was:

Now: $5,354.00
418 Bulkhead Steerer - 10 Tooth Sprocket - Tapered Shaft (Less Brake)

MSRP:

Was:

Now: $1,168.00
Chain & Wire Kit - 2S2B13 (77112)

MSRP:

Was:

Now: $370.00

Add to Cart
Stainless Key Stock - 6" Length, 1/4" x 1/4" (684-250)

MSRP:

Was:

Now: $26.00

Add to Cart
Edson 336 Pedestal Wheel Nut for Tapered Shafts (960-A-2105)

MSRP:

Was:

Now: $34.00

Add to Cart
10in Aluminum Sheave with Needle Bearings (ONLY)

MSRP:

Was:

Now: $477.00

Add to Cart
Bronze Rudder Post Stuffing Box - 1.660" ID

MSRP:

Was:

Now: $273.00

Add to Cart

Chain & Wire Kit - 2S2B7 (77109)

Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between...

MSRP:

Was:

Now: $352.00

Add to Cart
Bronze Hub for 36-inch to 42-inch Dia. Wheels

With Edson's Wheel Bronze Wheel Hub for 36”-42” Diameter Wheels you can make your own traditional mahogany or teak wheels! Using a two piece design, it allows you to assemble your wheel easily...

MSRP:

Was:

Now: $1,022.00

Add to Cart
26-inch Classic Teak Yacht Wheel with Teak Rim with 1-inch Straight Hub

Edson's Classic Teak Yacht Wheel is the true original! In production for over 125 years, this is a wheel that belongs on any classic yacht or stately passage-maker. Handcrafted to the highest...

MSRP:

Was:

Now: $4,946.00
408 Needle Bearing Shelf Steerer - 15 Tooth Sprocket 3/4-inch (#60) Chain - Tapered Shaft (With Brake)

Edson’s Needle Bearing Shelf Steerers are designed to provide precise steering control for larger boats. They a

MSRP:

Was:

Now: $1,511.00
3/4" Pull/Pull Conduit for 3/16" and 1/4" Wire Rope (includes two end fittings and grease)

Edson pull-pull conduit systems are designed to provide the ability to run steering cables around spaces or structures that otherwise might be difficult or impossible with straight wire runs from...

MSRP:

Was:

Now: $143.00 - $542.00

Choose Options
Stainless Steel Shaft Collar 960-A-2715)

Edson's Stainless Steel Shaft Collar helps prevent your steering wheel shaft from moving forward and aft of the boat while in use. #960-A-2715 Stainless Steel Shaft Collar:

MSRP:

Was:

Now: $51.00

Add to Cart
Brake Kit for 418, 420, 476, 490 Steerers (316-STEERER)

Just like your car, your boat’s wheel brake needs periodic relining. This kit includes all you need to make your brake work like new again. #316-STEERER Brake Maintenance Kit includes: <

MSRP:

Was:

Now: $110.00

Add to Cart
Pedestal Touch-Up Paint (A-2963)

Edson’s White Touch-up Paint is custom formalized to match Edson’s white baked-on urethane powder coating finish. Ideal for small nicks and scratches in your Pedestal, Engine Control or other white...

MSRP:

Was:

Now: $37.00

Add to Cart
Nylon Shaft Washer (960-A-137)

Edson's Nylon Shaft Washer (960-A-137) is designed for Edson's 335 Pedestals (Side Brake Model) & Edson's 336 Pedestal (Through Shaft Brake Model).

MSRP:

Was:

Now: $4.00

Add to Cart
8in Bronze Sheave with Needle Bearings (ONLY)

Edson’s Sheaves may be the answer in many areas of custom boat building, not only for steering but also for centerboards, custom deck hardware, or remote actuators, such as emergency shut off valves...

MSRP:

Was:

Now: $722.00

Add to Cart
Flat Aluminum Sheave Assembly - 8" Aluminum Sheave

Edson’s Flat Sheave Assembly will allow you to turn steering cable around a sheave in tight areas where vertical assemblies normally wouldn't fit. Constructed of anodized

MSRP:

Was:

Now: $647.00

Add to Cart
Single Articu-Lock Sheave Assembly - 10" Aluminum Sheave

Edson’s Articu-Lock Sheaves – Ideal for performance sailboats, cruising/racing catamarans and high-tech cruising yachts above 27 feet. Edson engineers have designed this new sheave to be lightweight,...

MSRP:

Was:

Now: $764.00

Add to Cart
Bronze Rudder Post Stuffing Box - 1.625" ID

Edson's Rudder Post Stuffing Box combines a rudder post bearing with an above-the-waterline stuffing box for. We recommend fiberglassing the stuffing box/bearing to the top of the tubing when the...

MSRP:

Was:

Now: $273.00

Add to Cart
Right Angle Conduit Bracket

Edson’s Right Angle Bracket, mounted below a bulkhead steerer, provides an easy anchoring point for both conduit end fittings.

MSRP:

Was:

Now: $67.00

Add to Cart
Upright Conduit Idler - 6" Sheave

Upright Conduit Idlers allow you to turn steering cable around a sheave rather than through the conduit, reducing wear and friction. Upright Conduit Idlers are an absolute must on boats over 39’...

MSRP:

Was:

Now: $470.00

Add to Cart
Chain & Wire Kit - 2S2B9 (77111)

Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between...

MSRP:

Was:

Now: $372.00

Add to Cart
Chrome Hub for 20-inch to 26-inch Dia. Wheels

With Edson's Wheel Chrome Wheel Hub for 20”-26” Diameter Wheels you can make your own traditional mahogany or teak wheels! Using a two piece design, it allows you to assemble your wheel easily...

MSRP:

Was:

Now: $1,009.00

Add to Cart
30-inch Classic Teak Yacht Wheel with Teak Rim with 1-inch Straight Hub

Edson's Classic Teak Yacht Wheel is the true original! In production for over 125 years, this is a wheel that belongs on any classic yacht or stately passage-maker. Handcrafted to the highest...

MSRP:

Was:

Now: $5,354.00
418 Bulkhead Steerer - 10 Tooth Sprocket - Tapered Shaft (Less Brake)

Edson's 418 Bulkhead Steerer is lightweight, versatile and rugged. For use on performance and cruising boats alike. Edson’s Bulkhead Steerers feature Stainless Steel Needle Bearings to reduce...

MSRP:

Was:

Now: $1,168.00
Chain & Wire Kit - 2S2B13 (77112)

Edson's Chain & Wire Kits are constructed of the highest quality marine-grade, non-magnetic materials! One length of roller chain and two lengths of wire are assembled with the connections between...

MSRP:

Was:

Now: $370.00

Add to Cart
Stainless Key Stock - 6" Length, 1/4" x 1/4" (684-250)

Stainless Key Stock is 6-inches in length with a width and depth of 1/4-inches.

MSRP:

Was:

Now: $26.00

Add to Cart
Edson 336 Pedestal Wheel Nut for Tapered Shafts (960-A-2105)

For #336 Pedestal with Through Shaft Brake and Tapered shaft.

MSRP:

Was:

Now: $34.00

Add to Cart
10in Aluminum Sheave with Needle Bearings (ONLY)

Edson’s Sheaves may be the answer in many areas of custom boat building, not only for steering but also for centerboards, custom deck hardware, or remote actuators, such as emergency shut off valves...

MSRP:

Was:

Now: $477.00

Add to Cart
Bronze Rudder Post Stuffing Box - 1.660" ID

Edson's Rudder Post Stuffing Box combines a rudder post bearing with an above-the-waterline stuffing box for. We recommend fiberglassing the stuffing box/bearing to the top of the tubing when the...

MSRP:

Was:

Now: $273.00

Add to Cart